LORD & DOWNING Rendering and Plastering

PFT JETSET
THE ALLROUND SPRAYING GUN AND ADHESIVE SET

Just open the lever, and the mortar flows; shut the lever, and the machine switches off.

The PFT JETSET with automatically pressure switch off consists of an ID 24 mortar hose coupling, a pressure sensor with a 4-pole remote control plug, and a ball tap with a GEKA coupling to which a 3/ 4" hose piece, 150 mm in length, is connected as standard equipment. When the ball tap is closed, the mortar pressure in the spraying unit increases.

The pressure sensor detects the increased mortar pressure and transmits this signal to the remote control switch, which automatically turns the corresponding PFT pump on or off.

 

FIELD OF APPLICATION

Application of adhesive mortar to boards for heat-insulating composite systems
Fast and reliable grouting of door frames and cavities
The application of decorative plaster can easily be achieved using the decorating nozzle
With the nozzle for finishing plaster, the PFT adhesive and spraying gun can be converted into a finishing unit within a few seconds

ADVANTAGES AT A GLANCE:

A case, two remarks, three spraying caps, five possibilities:
The PFT JETSET case for jointing, grouting and bonding.
Thus you work in the future as rationally and surely as never before!

Fast conversion owing to GEKA coupling
Largest security and simplest handling by automatically pressure switch-off device: the machine brakes fully, if no pressure on the line
No outflow of additional material: clean working, without material losses
Operating errors impossible

For Kit and related accessories    [Click here]