PFT ROTOMIX/ROTOQUIRL
The PFT ROTOQUIRL II and PFT ROTOMIX are units known as remixers and can
be connected to the PFT mixing tube of the G 4, G 5, MINIJET and MONOJET.
Additional remixing improves the mortar properties and allows you to make full use of
the material quality. The PFT ROTOQUIRL II with a content of 4.2 l has the advantage
over the PFT ROTOMIX that the material can remain in the mixing zone for a longer time
thanks to a larger pot. The impeller employed in the remixer is driven directly by the pump
motor (conveyor spiral with tang).
For example:
Scratch coat render Bonding mortar Mortars for door frames Self levelling floor screed
ADVANTAGES AT A GLANCE
Additional remixing improves the mortar properties and allows you to make full use of the
material
quality. The PFT ROTOQUIRL II with a content of 4.2 l has the advantage over the
PFT ROTOMIX
that the material can remain in the mixing zone for a longer time thanks to a
larger pot. The impeller
employed in the remixer is driven directly by the pump motor
(conveyor spiral with tang).
FUNCTION
The larger air bubbles in the mortar are reduced in size and thus stabilized by the remixer.
For that reason,
these air bubbles do not burst any longer when the material flows out of the
mortar nozzle. This makes the
mortar softer and more productive. As a result of intensive
remixing, the mortar is mixed into a paste without
any knot formation, so that easy, fast and
uniform application is ensured. Intensive remixing also makes the
aggregates fully effective.
Work with an optimal water-gypsum factor is possible. Soft mortar showing good
elastic
properties as a finished gypsum plaster can therefore be created. The use of a remixer
results in higher
mortar output in almost all cases